电加热恒温箱操作方法和应用关键点

你了解如何实际操作电加热恒温箱吗，下边创日新小姐姐带大伙儿认识一下电加热恒温箱操作方法和应用关键点。

Do you know how to operate the electric heating thermostat in practice? Miss Chuang Il-shin below will show you the key points of the operation and application of the electric heating thermostat.

电热培养箱的操作技巧：

Operating skills of electrothermal incubator:

1、接通电源，按下电源开关，此时电源指示灯亮。

1. Turn on the power supply and press the power switch. At this time, the power indicator lights up.

2、实际操作工作人员需认真阅读使用说明书，掌握、了解电加热恒温箱作用后，能够接入开关电源。

2. Practical operators need to read the instructions carefully, master and understand the function of electric heating thermostat, and be able to access switching power supply.

3、当恒温箱显示信息溫度超过设置溫度时，加温终断、加温显示灯吹灭，在规范工作温度下插电90分鐘后，溫度可长期保持，如箱里及时溫度超出设置限制警报溫度控温仪溫度追踪警报显示灯亮，另外全自动断开电加热器开关电源。

3. When the display temperature of the thermostat exceeds the set temperature, the heating terminates and the display lamp blows out. After 90 minutes of plugging in at the standard working temperature, the temperature can be maintained for a long time, such as when the temperature in the box exceeds the set limit alarm temperature controller, the temperature tracking alarm display lamp is on, and the heater switch is automatically disconnected. Power Supply.

4、把温度控制仪调到用户所需的设定温度值。

4. Set the temperature controller to the set temperature required by the user.

5、如开启玻璃移门取试品时，电加热器、送风模式机遇终止工作中，当合上玻璃移门后，电加热器和离心风机能够一切正常运行，那样可防止塑造物的环境污染及溫度的过程状况。

5. If the glass door is opened to take the sample, the electric heater and the air supply mode will stop working. When the glass door is closed, the electric heater and the centrifugal fan can operate normally, which can prevent the environmental pollution of the moulding objects and the process condition of temperature.

电热培养箱的使用要点：

Main points of using electrothermal incubator:

1、仪器设备不适合在髙压、大电流量、强磁场标准下应用，以防干挠温度控制仪及产生触电事故风险。

1. Instruments and equipment are not suitable for application under the standard of pressure, large current and strong magnetic field, in order to avoid the risk of dry-twisting temperature controller and electric shock.

2、电热培养箱外壳必须有效接地，以保证使用安全。

2. The shell of electrothermal incubator must be grounded effectively to ensure safe operation.

3、本产品出厂前已经过严格调试，控温仪菜单设定数据，请勿随意修改。

3. The product has been strictly debugged before leaving the factory. The menu of the thermostat sets the data. Do not modify it at will.

4、请勿放置易燃易爆物品进行加温，严防发生危险。

4. Do not place inflammable and explosive materials for heating to prevent danger.

5、电镀工艺零部件和表层饰漆，应常常清洁，如长期性无需，应在电镀件上涂中性化植物油脂或甘油，以耐腐蚀，恒温箱外边套好塑料膜防尘套将恒温箱放到干躁房间内，以防控温仪返潮毁坏。

5. Plating process parts and surface finish should always be clean. If it is not needed for a long time, neutralized vegetable oil or glycerin should be applied on the plating parts to resist corrosion. Plastic film dust-proof cover should be put on the outer side of the thermostat to keep the thermostat in a dry and restless room to prevent dampness and damage of the thermostat.

6、请勿放置高酸高碱物品，防止箱体腐损。

6. Do not place high-acid and high-alkali articles to prevent the box from decaying.http://www.crxyq.cn/